1. Air cooled type spindle (China brand or Italian brand)
2. Bigger or smaller power spindles (6kw or 3kw)
3. High-grade cooling system (chiller, it has alarming system)
4. double-head or more heads
5. servo motors (China brand or Japan brand)
6. Auto tool change system (this system need other systems accordingly, like LNC control system, servo motors etc)
7. Weihong DSP Control system ,NK105 Model or Mach 3
8. other customerized features.
1)Imported ballscrew from Germany and imported linear square orbit.
2) Performance in continuing engraving after point and blade breaks. 3) Special saving mode of different points. 4) The cutting with large power spindle does not only increase the fineness of engraving but also cut into 2 cm freely. 5) It is mainly used for the architecture mould,identity industy,school, enterprise and government.
Apply to industry and materialsIt is widely used in processing metal (aluminum, brass, stainless steel), wood, acrylic, dual color board, plastic, stone, glass as well as many other nonmetal materials, and can do perfect 2D/3D carving or cutting.
|X,Y,Z Traveling positioning accuracy||±0.03/300mm|
|X,Y,Z Reposition accuracy||±0.02mm|
|Drive motors||Stepper system|
|Working voltage||220v 50HZ/60HZ|
|Spindle revolving speed||6000-24000rpm|
|Operating system||NC studio|
|Flash memory||128M(U Disk)|
|Collet||ER11(3.175/4/6mm. Optional )|
|Software compatiliby||Type3/Artcam/Artcut/Ucancam/JDpaint etc software|
|Running environment temperature||0-45 centigrade